The patented* EMIT SmartLog V5™ system is designed
for fast, frequent, and accurate testing of ESD personnel
grounding items. Its unique design embeds an ESD
tester, time clock, keypad, barcode scanner, Ethernet
module and proximity badge reader (optional) into a
compact stainless steel enclosure.
By touching the solid-state switch once, the SmartLog
V5™ independently tests the resistance path limits of
the worn wrist strap and both worn ESD footwear in less
than 2 seconds. It may also test a worn ESD garment
if it is used as part of personnel grounding path. Test
results are electronically stored in the SmartLog V5™
and easily downloaded to a PC for logging records
and evaluation. This product can be used as one of
the tools to fulfill the ANSI/ESD S20.20 section 7.3
“Compliance Verification Plan.”
Paperless data can enhance operator accountability,
immediately identifying problems while reducing logging
and auditing costs. There is no need to dedicate a
computer for each test station. The SmartLog V5™ is
a complete system including all required components.
Operator identification can be accomplished using
the keypad, scanning a barcode badge or waving a
proximity badge (verify compatibility with the factory).
The SmartLog V5™ can test either single or dual-wire
wrist straps and its split footplate design provides
individual footwear testing all in a single test. With
the use of TEAM5 Software, the SmartLog V5™ can
be programmed to assign unique test requirements to
personnel. An individual can be required to test either
wrist strap only, footwear only or a combination of the
two.
If a resistance path is below or exceeds the set limits,
the SmartLog will indicate failure via audio and visual
alarms. Use the included relay terminal to promote
access control for passed tests.
The SmartLog V5™ can also be networked to a
company’s Intranet using its embedded Ethernet
module. The SmartLog V5™ is calibrated to NIST
traceable standards.