SM100.SA
4 1/2
" 115mm
Reverse action for handling PCBs with SMDs |
SM101.SA
4 1/2
" 115mm
Reverse action for soldering and de-soldering 8 , 14 or 16 lead SMDs |
SM102.SA
4 1/2
" 115mm
Reverse action for soldering and de-soldering 20 , 28 , 44 and 68 LCCC and PLCC pad devices |
SM103.SA
4 1/2 " 115mm
For handling and positioning 2 and 3 lead SOT packages at 45 degree angle |
SM104.SA
4 3/4 " 120mm
For handling and positioning 3 lead SOT packages , monolithic chip capacitors etc |
SM105.SA
4 3/4 " 120mm
Special design for positioning all SOT packages vertically |
SM106.SA
4 3/4 " 120mm
For positioning all SOT packages horizontally. With flat base tips (4 mm long) |
SM107.SA
4 3/4
" 120mm
For positioning all flat devices at 60 degree angle. |
SM108.SA
4 3/4" 120 mm
For positioning and soldering 1mm wide components. tips are grooved inside |
SM109.SA
4 3/4" 120 mm
Same as SM 108 but with 45 degree tips without anti)crush feature |
SM110.SA
4 3/4" 120 mm
For positioning monolithic chips capacitor, grooved tips |
SM111.SA
4 3/4" 120 mm
For positioning 5 mm monolithic chips capacitor with flat base grooved tips (2 mm long) |
SM112.SA
4 3/4" 120 mm
For positioning 5 mm monolithic chips capacitors at 60 degree, grooved tips |
SM113.SA
4 3/4" 120 mm
3 mm long tips bent at 60 degree angle one forked blade lead entry |
SM114.SA
4 3/4" 120 mm
Same as SM 113 but with straight tips for vertical holding. |
SM115.SA
4 3/4" 120 mm
Grooved tips at 30 degree angle for holding and positioning cyclindrical devices (up to 1 mm diam.)> |
SM116.SA
4 3/4" 120 mm
Grooved straight tips for vertical positioning of cyclindrical devices (up to 1 mm or more) |
SM117.SA
4 3/4" 120 mm
For positioning FOT package at 30 degree angle |
K5SMD.SA
SM103 , SM107 , SM108 , SM111 , SM115
tops quality hard/foam wallet |
|
|